Dear NONMEM users,
I am trying to install NONMEM 7 and G95 on a server.
There is problem when testing the compiler, Pdx-pop says:
> Testing GNU g95 Fortran
>>>ld: cannot open output file C:\gmtest.exe: Permission denied
Looks like I do not have the right. Can I avoid the 'C:\' disk? If so, how
should I set up the path?
Any feedback would be highly appreciated.
Best regards,
Kehua
installation problem for NONMEM7 G95 on server
A couple of points:
1. your compiler or linker is failing, I recommend testing the compiler
indepently of PDx-Pop (from a DOS window) to lessen the complexity of
the test by a degree.
2. you may not have permission to write to the root directory, c:\. Try
from within a directory you know you can read/write.
3. we currently don't recommend g95 for NONMEM 7, I would suggest
gfortran (you can get a copy of gfortran-windows.exe at
ftp://ftp.globomaxnm.com/Public/nonmem7/compilers/)
A successful test will then look like this:
c:\test>gfortran gmtest.for
c:\test>a.exe
ICON Development Solutions - Tools for Expediting
Population Analysis (c) 2009
Quoted reply history
________________________________
From: [email protected] [mailto:[email protected]]
On Behalf Of kehua wu
Sent: Tuesday, August 03, 2010 4:38 PM
To: [email protected]
Subject: [NMusers] installation problem for NONMEM7 G95 on server
Dear NONMEM users,
I am trying to install NONMEM 7 and G95 on a server.
There is problem when testing the compiler, Pdx-pop says:
> Testing GNU g95 Fortran
>>>ld: cannot open output file C:\gmtest.exe: Permission denied
Looks like I do not have the right. Can I avoid the 'C:\' disk? If so,
how should I set up the path?
Any feedback would be highly appreciated.
Best regards,
Kehua
Dear all,
Did anyone already tried to install NONMEM7 with gfortran compiler and windows
vista on a 32 bit system?
I'm always get the following message:
===checking compiler
Cannot run install
===
Compiler gfortran and/or install program cannot be run
Installation aborted
I already tested the compiler and that was successsful.
Can someone help me?
Tx,
Stefaan
________________________________
Quoted reply history
Van: [email protected] [[email protected]] namens
Bachman, William [[email protected]]
Verzonden: woensdag 4 augustus 2010 14:46
Aan: kehua wu
CC: [email protected]
Onderwerp: RE: [NMusers] installation problem for NONMEM7 G95 on server
A couple of points:
1. your compiler or linker is failing, I recommend testing the compiler
indepently of PDx-Pop (from a DOS window) to lessen the complexity of the test
by a degree.
2. you may not have permission to write to the root directory, c:\. Try from
within a directory you know you can read/write.
3. we currently don't recommend g95 for NONMEM 7, I would suggest gfortran (you
can get a copy of gfortran-windows.exe at
ftp://ftp.globomaxnm.com/Public/nonmem7/compilers/)
A successful test will then look like this:
c:\test>gfortran gmtest.for
c:\test>a.exe
ICON Development Solutions - Tools for Expediting
Population Analysis (c) 2009
________________________________
From: [email protected] [mailto:[email protected]] On
Behalf Of kehua wu
Sent: Tuesday, August 03, 2010 4:38 PM
To: [email protected]
Subject: [NMusers] installation problem for NONMEM7 G95 on server
Dear NONMEM users,
I am trying to install NONMEM 7 and G95 on a server.
There is problem when testing the compiler, Pdx-pop says:
> Testing GNU g95 Fortran
>>>ld: cannot open output file C:\gmtest.exe: Permission denied
Looks like I do not have the right. Can I avoid the 'C:\' disk? If so, how
should I set up the path?
Any feedback would be highly appreciated.
Best regards,
Kehua
Yes, many people have. You just have to turn off Windows 7 UAC (user access
control). Google it for instructions.
Quoted reply history
----- Original Message -----
From: "Stefaan Rossenu" <[email protected]>
To: "William Bachman" <[email protected]>
Cc: [email protected]
Sent: Saturday, August 21, 2010 3:22:48 AM
Subject: RE: [NMusers] installation problem for NONMEM7 G95 on server
Dear all,
Did anyone already tried to install NONMEM7 with gfortran compiler and windows
vista on a 32 bit system?
I'm always get the following message:
===checking compiler
Cannot run install
===
Compiler gfortran and/or install program cannot be run
Installation aborted
I already tested the compiler and that was successsful.
Can someone help me?
Tx,
Stefaan
Van: [email protected] [[email protected]] namens
Bachman, William [[email protected]]
Verzonden: woensdag 4 augustus 2010 14:46
Aan: kehua wu
CC: [email protected]
Onderwerp: RE: [NMusers] installation problem for NONMEM7 G95 on server
A couple of points:
1. your compiler or linker is failing, I recommend testing the compiler
indepently of PDx-Pop (from a DOS window) to lessen the complexity of the test
by a degree.
2. you may not have permission to write to the root directory, c:\. Try from
within a directory you know you can read/write.
3. we currently don't recommend g95 for NONMEM 7, I would suggest gfortran (you
can get a copy of gfortran-windows.exe at
ftp://ftp.globomaxnm.com/Public/nonmem7/compilers/ )
A successful test will then look like this:
c:\test>gfortran gmtest.for
c:\test>a.exe
ICON Development Solutions - Tools for Expediting
Population Analysis (c) 2009
From: [email protected] [mailto:[email protected]] On
Behalf Of kehua wu
Sent: Tuesday, August 03, 2010 4:38 PM
To: [email protected]
Subject: [NMusers] installation problem for NONMEM7 G95 on server
Dear NONMEM users,
I am trying to install NONMEM 7 and G95 on a server.
There is problem when testing the compiler, Pdx-pop says:
> Testing GNU g95 Fortran
>>>ld: cannot open output file C:\gmtest.exe: Permission denied
Looks like I do not have the right. Can I avoid the 'C:\' disk? If so, how
should I set up the path?
Any feedback would be highly appreciated.
Best regards,
Kehua
Hi Steefan
I recently had this problem and it was a pain trying to figure it out.
If you go to Control Panel, System & Security, Change User Account Control
Settings and then set the slide bar to never notify (it will then notify you
about not notifying you) and if you click OK and reboot it will deactivate this
endearing Win7 feature.
Regards
Steve
--
Professor Stephen Duffull
Chair of Clinical Pharmacy
School of Pharmacy
University of Otago
PO Box 56 Dunedin
New Zealand
E: [email protected]<mailto:[email protected]>
P: +64 3 479 5044
F: +64 3 479 7034
W: http://pharmacy.otago.ac.nz/profiles/stephenduffull
Design software: http://www.winpopt.com
Quoted reply history
From: [email protected] [mailto:[email protected]] On
Behalf Of [email protected]
Sent: Saturday, 21 August 2010 10:57 p.m.
To: Stefaan Rossenu
Cc: [email protected]; William Bachman
Subject: Re: [NMusers] installation problem for NONMEM7 G95 on server
Yes, many people have. You just have to turn off Windows 7 UAC (user access
control). Google it for instructions.
----- Original Message -----
From: "Stefaan Rossenu" <[email protected]>
To: "William Bachman" <[email protected]>
Cc: [email protected]
Sent: Saturday, August 21, 2010 3:22:48 AM
Subject: RE: [NMusers] installation problem for NONMEM7 G95 on server
Dear all,
Did anyone already tried to install NONMEM7 with gfortran compiler and windows
vista on a 32 bit system?
I'm always get the following message:
===checking compiler
Cannot run install
===
Compiler gfortran and/or install program cannot be run
Installation aborted
I already tested the compiler and that was successsful.
Can someone help me?
Tx,
Stefaan
________________________________
Van: [email protected] [[email protected]] namens
Bachman, William [[email protected]]
Verzonden: woensdag 4 augustus 2010 14:46
Aan: kehua wu
CC: [email protected]
Onderwerp: RE: [NMusers] installation problem for NONMEM7 G95 on server
A couple of points:
1. your compiler or linker is failing, I recommend testing the compiler
indepently of PDx-Pop (from a DOS window) to lessen the complexity of the test
by a degree.
2. you may not have permission to write to the root directory, c:\. Try from
within a directory you know you can read/write.
3. we currently don't recommend g95 for NONMEM 7, I would suggest gfortran (you
can get a copy of gfortran-windows.exe at
ftp://ftp.globomaxnm.com/Public/nonmem7/compilers/<about:blank>)
A successful test will then look like this:
c:\test>gfortran gmtest.for
c:\test>a.exe
ICON Development Solutions - Tools for Expediting
Population Analysis (c) 2009
________________________________
From: [email protected] [mailto:[email protected]] On
Behalf Of kehua wu
Sent: Tuesday, August 03, 2010 4:38 PM
To: [email protected]
Subject: [NMusers] installation problem for NONMEM7 G95 on server
Dear NONMEM users,
I am trying to install NONMEM 7 and G95 on a server.
There is problem when testing the compiler, Pdx-pop says:
> Testing GNU g95 Fortran
>>>ld: cannot open output file C:\gmtest.exe: Permission denied
Looks like I do not have the right. Can I avoid the 'C:\' disk? If so, how
should I set up the path?
Any feedback would be highly appreciated.
Best regards,
Kehua